The Model 05103 Wind Monitor is a high performance rugged wind sensor. Its simplicity and corrosion resistant construction make it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal with frequency directly proportional to wind speed. Slip rings and brushes are eliminated for increased reliability.
The wind direction sensor is a rugged yet lightweight vane with a sufficiently low aspect ratio to assure good fidelity in fluctuating wind conditions. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. With a known excitation voltage applied to the potentiometer, the output voltage is directly proportional to vane angle. A mounting orientation ring assures correct realignment of the wind direction reference when the instrument is removed for maintenance.
The instrument is made of UV stabilized plastic with stainless steel and anodized aluminum fittings. Precision grade, stainless steel ball bearings are used. Transient protection and cable terminations are in a convenient junction box on the mounting post. The instrument mounts on standard 1 inch pipe.
For offshore and marine use, Model 05106, Wind Monitor-MA features special waterproof bearing lubricant and a sealed heavy duty cable pigtail in place of the standard junction box. Separate signal conditioning for voltage(0-1 VDC) or current(4-20mA) (See Model 05103L) outputs are available. These outputs are used by process control and SCADA systems.
Specifications:
Range: 0-100 m/s (224 mph), 0- 360°
Accuracy:Wind Speed: ±0.3 m/s (0.6 mph) or 1% of reading, Wind Direction: ±3 degrees
Operating Temperature: -50 to 50° C
Threshold: Propeller: 1.0 m/s (2.2 mph) Vane: 1.1 m/s (2.4 mph)
Signal Output: Wind speed: magnetically induced AC voltage, 3 pulses per revolution. 1800 rpm (90 Hz) = 8.8 m/s (19.7 mph) Wind direction: DC voltage from conductive plastic potentiometer – resistance 10K Ù, linearity 0.25%, life expectancy – 50 million revolutions
Power Requirement: Potentiometer excitation: 15 VDC maximum
Dimensions: 37 cm (14.6 in) H x 55 cm (21.7 in) L, Propeller: 18 cm (7 in) dia.
Mounting: 34 mm (1.34 in) dia. (standard 1 inch pipe)
Weight:1.0 kg (2.2 lbs)
Shipping weight: 2.3 kg (5 lbs)
|
