Scientific Sales inc

For mounting Vantage Pro2 solar radiation and/or UV sensors. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.

Optional Mounting Pole Kit includes two galvanized steel poles, connector, and mounting hardware.

Multi-purpose temperature probe with 2ﾽ" (64 mm) - long stainless steel housing. Use to measure temperature of air, soil, or water. Add up four probes to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6 m) direct-burial cable.

Watermarkﾩ soil moisture sensor uses electrical resistance to measure the moisture level of the soil. Does not require periodic maintenance during the growing season. Simply bury at the desired depth, then monitor moisture levels throughout the season. Add up to four sensors to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6 m) cable.

Use to monitor the level of surface moisture on foliage, with range from 0 (completely dry) to 15 (saturated). Add up to two sensors to a single Wireless Leaf & Soil Moisture/Temperature Station. Includes 40' (12 m) cable.

Davis Instruments 7747 Daytime Fan-Aspirated Radiation Shield Kit is a great addition to your Vantage Pro2 or Vantage Pro2 Plus weather station!

For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro or Pro2. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when it's not connected to your PC. Later, download the data and use the software to create graphs, generate summaries, and more.

For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro or Pro2. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when it's not connected to your PC. Later, download the data and use the software to create graphs, generate summaries, and more.

To measure solar radiation and solar energy.

Receive data from a Vantage Pro2 integrated sensor suite or special-purpose station, and post it to your computer no console required! Weather Envoy, when used along with WeatherLink, will collect and store data from the outdoor sensors. Download to your computer at your convenience, then use the WeatherLink software to view current conditions, graph and chart historical data, or even create your own weather web pages.

Receive data from a Vantage Pro2 integrated sensor suite or special-purpose station, and post it to your computer - no console required! Weather Envoy, when used along with WeatherLink, will collect and store data from the outdoor sensors. Download to your computer at your convenience, then use the WeatherLink software to view current conditions, graph and chart historical data, or even create your own weather web pages.

• Console: 8" x 8" x 4" (203mm x 203mm x 101mm)
• LCD Display: 3" x 4 3/8" (80mm x 110mm)

• Console: 8" x 8" x 4" (203mm x 203mm x 101mm)
• LCD Display: 3" x 4 3/8" (80mm x 110mm)

Solar-powered kit for use with wireless Vantage Pro2 or Vantage Pro2 Plus. Allows you to locate the anemometer independently from the rain collector, up to 1000' (300 m) away from the console/receiver. For longer distances, add one or more wireless repeaters. Kit includes transmitter inside weather-resistant shelter, solar panel, battery, and mounting hardware.

Battery-powered station includes stainless steel temperature probe with 12' (2.6 m) cable, transmitter and battery inside weather-resistant shelter, and mounting hardware. To view the data, add a wireless Vantage Pro2 console/receiver, or Weather Envoy and WeatherLink. Battery lasts up to one year under normal conditions.

For use in cold climates to measure freezing rain or the moisture content of snowfall. Requires access to AC power; may not be run using a solar power kit.

For longer distances or to improve reception in troublesome areas, add one or more wireless repeaters.

Solar-powered station includes transmitter and battery inside weather-resistant shelter.

To view the data, add a wireless Vantage Pro2 console/receiver, or Weather Envoy and WeatherLink. Each can receive data from either:

• A single fully-populated station with 2 leaf wetness sensors, 4 soil moisture sensors, and 4 temperature probes, or
• Two partially-populated stations, one with 2 leaf wetness sensors and 2 temperature probes, and the other with 4 soil moisture sensors and 4 temperature probes.

For longer distances or to improve reception in troublesome areas, add one or more wireless repeaters. Solar Powered.

Battery-powered station includes temperature and humidity sensors inside protective radiation shield, and transmitter and lithium battery inside weather-resistant shelter. Battery lasts up to one year under normal conditions. To view the data, add a wireless Vantage Pro2 console/receiver or Weather Envoy and WeatherLink. Includes hardware for mounting on fence post or pole. Mounting pole is not included.

Davis Instruments 6312 Wireless Vantage Pro2 Console Receiver allows you to monitor weather information from another room, office, building - or even a neighbor's Vantage Pro2 wireless station!

Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose.

For use with the free CAMEOﾩ software developed by NOAA and the EPA. With Vantage Pro2, provides the real-time weather data needed to map the footprint of a hazardous plume, predict its dispersion, and help make critical public safety decisions - all at just a fraction of the cost of other systems.

To locate your station console and other components outside, at a field or remote location. Weather-resistant NEMA 4X enclosure provides protection from the elements for any of the following:

Solar-powered station includes transmitter and battery inside weather-resistant shelter.

To view the data, add a wireless Vantage Pro2 console/receiver, or Weather Envoy and WeatherLink. Each can receive data from either:

• A single fully-populated station with 2 leaf wetness sensors, 4 soil moisture sensors, and 4 temperature probes, or
• Two partially-populated stations, one with 2 leaf wetness sensors and 2 temperature probes, and the other with 4 soil moisture sensors and 4 temperature probes.