Home > Products > VANTAGE PRO2 ACCESSORIES >

7346.070 Replacement Temp/Hum board for Davis VP2



 
: $79.00
: $49.99
You save $29.01!


Availability:: Usually Ships in 24 Hours
Product Code: 7346.070
Qty:

Description
 

This is a digital temperature humidity sensor intended for Davis Vantage Pro2 units which began production in early 2016 and specifically have a manufacturing code which starts with AS or later ( e.g. AT, AU, AV, etc.). This module will work in a “plug-and-play” fashion with following models (for all geographical versions USA, EU, UK, OV) with the above stated manufacturing code:

  • 6152
  • 6162c
  • 6152
  • 6162
  • 6153
  • 6163
  • 6323
  • 6322
  • 6322c
  • 6328
  • 6327
  • 6327c

This module will also work with Davis Vantage Pro2 units manufactured after January 2006 through manufacturing code AR, however, it will result in a reading which is 0.5 degrees Celsius (0.9 degrees Fahrenheit) too high. This error can be offset and corrected in the console as a calibration procedure (see page 26 of your console manual for calibration).

New Temperature Humidity sensor spec

Temperature – ±0.3°C (±0.5°F) across entire range
Humidity – ±2% across entire range

Old Temperature Humidity sensor spec

Temperature – ±0.5°C (±1°F) above -7°C (20°F) and ±1°C (±2°F) under -7°C (20°F)
Humidity – ±3% (0 to 90% RH) and ±4% (90 to 100% RH)


Average Customer Review: 5 of 5 Total Reviews: 13 Write a review.

  0 of 0 people found the following review helpful:
 
Excellent experience December 8, 2017
Reviewer: Peter Portanova from Northport, NY United States  
This is the company that you should do business with, from taking the order to shipping it was smooth.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Replacement Temp/Hum board for Davis VP2 November 15, 2017
Reviewer: Anonymous Person from McKinleyville, CA United States  
Part I ordered was exactly what I needed and was shipped and received an acceptable time.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
November 14, 2017
Reviewer: Russell Jones from Oysterville, WA United States  
Order was filled promptly.Easy site to order on.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Good selection of parts for Davis Weather October 31, 2017
Reviewer: Charles Troutman from Shoreline, WA United States  
I was able to find an affordable replacement for a chronically failing humidity/temperature module for my Vantage Pro 2 station.  This will be the 4 replacement, but this was half the cost.  Glad they're here!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
very good September 22, 2017
Reviewer: Kazuyuki Matsui from Otsu, Shiga Japan  
I could measure the temperature & humidity successfully. Thank you!

Was this review helpful to you?

View All Customer Reviews