Home > Air Quality >

ES-642 Met One Remote Dust Monitor
ES-642 Met One Remote Dust Monitor


 
: $2,800.00
: $2,599.00
You save $201.00!
Pay Later Option:



Availability:: Usually Ships in 2 to 3 Days
Product Code: ES-642
Qty:

Description
 
The ES-642 Remote Dust Monitor is an industrial air-quality sensor designed to provide accurate measurements of particle concentration in both indoor and outdoor environments.

The unit is supplied in a rugged weatherproof enclosure. It includes an LCD display to provide information about particulate concentration, flow rate, instrument status and power. The electronics and optical system are protected from moisture by a built in intake heater that is humidity level controlled. The heater power is regulated to maintain a minimum humidity level. Additional features include a purge air system and an automatic zero calibration routine. The sensor can be wall mounted or installed on a vertical mast up to 3 inch in diameter.The ES-642 is supplied with a 10 ft cable and connector for power (15 to 40 VDC) and signal output. The ES-642 measures particulate concentration using a highly sensitive forward scatter laser nephelometer, having a measurement range of 0 to 100 mg/cubic meter or 0 to 100,000 ug/cubic meter. Optional sharp-cut cyclones are used to set the measurement level of the ES-642. As supplied it provides particulate monitoring for TSP, with the addition of the sharp-cut cyclone it can be set for particulate smaller than PM10 or smaller than PM2.5, or PM1. The accuracy of the instrument is set for particles +/-5% based on a traceable PSL 0.6 micron reference standard


Features

  • Rugged Weatherproof Enclosure: For reliable continuous outdoor operation
  • Purge Air System: Keeps optical components clean so the ES-642 can operate in adverse environments without performance degradation.
  • Automatic Zero Calibration: Reduces long term measurement drift by automatically adjusting the zero value each hour.
  • Controlled Inlet Heater: Active inlet humidity control to reduce measurement errors.
  • Front Panel LCD Display: Provides information about particulate concentration, flow rate and instrument status.
  • Flexible Mounting Hardware: Optional mounting bracket for wall or 2” vertical mast or for vertical mast diameters up to 4.7 inches (120 mm).

SPECIFICATION SHEET

Share your knowledge of this product with other customers... Be the first to write a review