Boltek LD-250 Lightning Detector and Lightning Detection System:
Live long range detection up to 300 miles (480km)
Track Storm Movement
User set alarms for close storm or severe storm alerts
Portability allows detector to be connected easily to a desktop PC or Laptops USB or Serial COM port
Display software is compatible with all current Windows operating systems
No online or recurring fees
One year parts & labor manufacturers warranty
The Boltek LD-250 Lightning Detector puts a live lightning map on your laptop or desktop computer. Within milliseconds of a lightning strike the detector beeps and your computer displays the strike location. As a full lightning detection system, the Boltek LD-250 Lightning Detector has a direction-finding antenna that measures lightning strike direction while the LD-250's receiver estimates distance from received signal strength. This Boltek storm tracker has advanced signal processing software that improves distance accuracy, reducing the effects of strike-to-strike variations in strike energy.
The Boltek LD-250 Lightning Detector can warn of both close and severe thunderstorms. If a storm is detected closer than a preset distance or the strike rate exceeds a preset limit, the LD-250 lightning detection system sounds its internal alarm and activates the computers alarm tone or WAV file notification. Both the Close Storm and Severe Storm alarm statuses are indicated on the Boltek LD-250 Lightning Detector's front panel. Front panel pushbuttons allow both the Strike tone and Alarm tones to be enabled or disabled.
Strike rates, both Close Strikes / Minute and Total Strikes / Minute are shown for the previous hour on the Strike Rate Trend Graph letting you easily see if storms are increasing in severity or dying off.
A custom vector map will allow you to zoom into the region of interest. Zoom out to the maximum range of 750 miles (1500 miles across) or zoom in as close as 15 miles to see only the nearby storms.
The LD-250 lightning detection system connects to your computer's USB or RS232 (COM) port making it suitable for use with both laptop and desktop computers. The Boltek LD-250 Lightning Detector will even detect lightning when your computer is turned off. When the LD-250 starts beeping or the Strike light starts flashing you can turn on your computer to see where the storms are located.
The LD-250 lightning detection system's data is live! You are actually detecting the lightning strikes themselves. There are no on-line or recurring charges of any kind.
The Boltek LD-250 Lightning Detector uses a small active antenna to receive the radio signals from lightning strikes. These signals are the crackling you hear on an AM radio during a thunderstorm. The direction-finding antenna is able to tell which direction the signal is coming from. The LD-250 lightning detection system measures the strength of the received signals internally to estimate distance.
Boltek LD-250 Lightning Detector's antenna is a small black box that can be mounted indoors in a wood framed structure, or outdoors using the ENC-1 outdoor enclosure.
LD-250 Lightning Detection System Receiver
ANT-1 Lightning Antenna
50 feet (15m) of Antenna Cable
120V/220V AC Power Supply
12VDC Automobile Power Cord
USB-RS232 Adapter Cable
DB9 Serial Cable
GPS/Compass connector to pigtail cable
Lightning Display Software (Windows)
Custom Vector Map