09101 Wind Monitor SE
09101 Wind Monitor SE

: $1,788.00
: $1,698.00
You save $90.00!
Pay Later Option:

Availability:: Usually Ships in 2 Weeks
Product Code: 09101

The Young 09101 Wind Monitor SE combines the performance and durability of the standard Wind Monitor with an optically encoded direction transducer and serial data output capability.

The wind speed sensor is a four blade helicoid propeller that turns a multipole magnet. Propeller rotation induces a variable frequency signal in a stationary coil. Slip rings and brushes are not used.

The wind direction sensor is a durable molded vane. An optical encoder measures vane angle, thereby eliminating the characteristic dead band and wear of potentiometer transducers. On these wind meter anemometers, the encoder is an absolute type so direction output remains accurate even if power is interrupted.

Raw transducer signals are processed by onboard electronics. A variety of serial protocols or a conventional calibrated voltage output may be selected with simple internal jumpers.

The Young 09101 Wind Monitor SE is designed for superior environmental resistance. Housing parts are UV stabilized thermoplastic. Fittings are stainless steel and anodized aluminum. Precision grade stainless steel ball bearings are used throughout. The wind meter anemometers mount on standard 1 inch pipes.

Wind Speed: Range: 0-60 m/s (130 mph)
Resolution: 0.1 unit
Gust Survival: 100 m/s (220 mph)
Accuracy: 0.3 m/s (1.0 mph)
Threshold: 1.0 m/s (2.2 mph)
Distance Constant: 2.7 m (8.9 ft)
Transducer: Rotating magnet and stationary coil

Wind Direction:
Range: 0-360 degrees
Accuracy: 2 degrees
Resolutuion: 1 degree
Threshold: 1.1 m/s (2.5 mph) @ 10ᄚ displacement
Delay Distance: 1.3 m (4.3 ft)
Damping Ratio: 0.25
Transducer: Absolute encoder

Power Requirement: 11-24 VDC, 20mA

Overall Height: 37 cm (14.6 in)
Overall Length: 55 cm (21.7 in)
Propeller: 18 cm (7 in) diameter
Mounting: 34 mm (1.34 in) diameter (std. 1 inch pipe)
Sensor weight: 1.0 kg (2.2 lbs)
Shipping Weight: 2.3 kg (5.0 lbs)
Voltage Output: WS: 0-5 VDC for 0-100 m/s WD: 0-5 VDC for 0-540 Serial RS-485: 2 wire-half duplex, 1200-9600 Baud RMY, NCAR, NMEA, or RMYT protocols Polled or continuous

Share your knowledge of this product with other customers... Be the first to write a review